Click Apply. For Sound Blaster X-Fi, Sound Blaster Audigy 4 Pro, and Sound Blaster Audigy 2 cards, the Line Out 2 Line Out 3 is also for Side Left (only on 7.1 speaker Click the Advanced button. Right-click on the device and click Update Driver.
Click to enlarge Adjust the input level if you have difficulty recording. Your feedback is essential for us to constantly refine our Knowledgebase articles to better support you. It is recommended to uninstall existing application software and then installing applications from the web that are designed for latest Windows. Note: - Your feedback is received anonymously, and thus cannot be responded to. http://support.creative.com/kb/ShowArticle.aspx?sid=1540
Ensure that a 3.5mm cable is not connected to the audio port of the headset when the headset is connected via USB. Secure the audio card to the computer. Please consult your system vendor on how to disable it.
Click to enlarge You can mute playback from microphone or line in device if you do not want to monitor or hear feedback. Click to enlarge Click the Properties button, and verify its status. Power down your computer, and remove the existing sound card from your PC if it is an expansion card. Creative Software Autoupdate Changing to a different controller may help.
You can use either Creative applications such as Audio Center or Creative Console Launcher, or Windows' Audio and Sound Wizard illustrated below. Creative Drivers Windows 10 Uninstalling existing audio devices If you see a set of audio jacks (microphone-in, line-out, etc) at the back of your PC, it is certain that there is already an audio device Right click it again, and select "Set as Default". http://support.creative.com/kb/ShowArticle.aspx?sid=26162 Make sure that your installed Sound Blaster device is chosen as the default device.
Once the physical connection is complete, you will need to set up your recording source and mixer. Sound Blaster Z Line In For example, select Line In. If you are using Windows 98 SE, the software installation often requires the Windows 98 installation disc. Connect from the Line-Out of the amplifier to the Line-In or Auxiliary In jacks.
If the sound card is still not detected, please try another PCI slot or another PC. 8. http://support.creative.com/kb/ShowArticle.aspx?sid=1774 Verifying software installation At Windows Desktop, click Start > Control Panel > Sound. Creative Sound Card Drivers To change the sampling rate, double click the Device Controls icon in Audio HQ or Audio Console select the required sampling rate from the Digital Output Sampling Rate list. 6. Sound Blaster Drivers Windows 7 Installing Sound Blaster hardware Turn off your computer and all peripheral devices if you are installing a new Sound Blaster card.
Click the Clean-up tab. button. Note: Product specification, technical or troubleshooting information are subjected to change. Optimize BIOS settings for improved audio quality Crackling and popping during sound playback can often be resolved by changing audio levels in games or modifying BIOS configuration. Sound Blaster Microphone Not Working
If your device, for example, "What U Hear" is one of the disabled devices, right click on it and select Enable and then Set as Default Device. Was this information helpful? For example, if you want to record from a Microphone, be sure to select Microphone as the Recording Source. Click on the Recording tab.
The What U Hear recording option is supported in Windows Vista for Sound Blaster X-Fi series (Excluding Extreme Audio series) and Sound Blaster Audigy series (excluding Sound Blaster Audigy LE, SE, Sound Blaster Mic Not Working Windows 10 Right click on the sound card listing, and then select Uninstall. Close all background applications, especially, Sound Recorder or other multimedia applications. 2.
Try to connect the USB audio device to a USB 2.0 port. Align the audio card with the card slot and press it gently but firmly into the slot as shown below. To stop recording, click the Stop button in the recording program. Creative Microphone Driver Make sure that the audio volume is not muted.
When using a FlexiJack, please ensure to select the same recording source from Control Panel and Creative Console Launcher. Use another USB port of another USB Host Controller if there are more than one USB Host Controllers on the computer. Alle rechten voorbehouden Websitestructuur | Privacy-beleid | Gebruiksvoorwaarden | Auteursrecht en handelsmerken WERELDWIJDE ONDERSTEUNINGNetherlands Bezoek uw regio/land Afrika Azië Europa Midden-Oosten Noord-Amerika Oceanië Zuid-Amerika Ondersteuning > Oplossingen in de kennisdatabank Verwante The existing audio device could be either a standalone expansion card or an audio chip integrated onto the motherboard.
Recording from a line in device ( VCR, TV, CD Player etc) The Line-In jack on the Sound Blaster card is a mini stereo-jack. Disable onboard audio and uninstall existing audio card If there is an onboard audio on your PC's motherboard, it is recommended that you disable onboard audio to prevent any conflicts it Note: - Your feedback is received anonymously, and thus cannot be responded to. Please refer to the web release notes in the download section for details.
It is preferred that the test PC be different from the first PC. If you do not need to use Audio Clean-up, go to step 11. Sound Blaster X-Fi Xtreme Audio Series users may experience issues with latency when trying to record via the microphone. If it does not fit properly, gently remove it and try again.
Replace the computer cover. Remove the computer cover. Last Updated: April 22, 2009 If you require further assistance, please send an email to technical support. You may use the Windows search utility by click on Start, Search and selecting to search all files located on the CD/DVD-ROM drive the disk is in and searching for the
For detailed instructions on how to install or move an expansions card such as a Sound Blaster card, please refer to the Sound Blaster manual, or the manual for your PC. Invoke dual-channel memory mode on the motherboard. Installing Sound Blaster drivers and applications Before using your Sound Blaster card, it is necessary to install its drivers and applications. You will need to examine, test or reconfigure the speaker system connected to the sound card.
Click the Play button, and you should be able to hear the Windows Startup sound from your headphones. Note that it may be necessary to use adapter cables to make this connection. This can damage your audio card when it is inserted into the slot. Browse the CD and open the Audio and Drivers folders.
Note: - Your feedback is received anonymously, and thus cannot be responded to. Your feedback is essential for us to constantly refine our Knowledgebase articles to better support you. Increase VGA Shared Memory Size if you are using an onboard graphics card.